TeeJet Swath XL SmartPad II - Manual (Page 74)

3-20 Chapter 3 - Real-Time Guidance
Data Setup
SmartPad II
Software Version 4.03
Example 2: Store As Applied Data Only
This example describes how to store As Applied data, there is no boundary mapping or mapping objects. Figure 3-23
shows how the Data menu is setup for Example 2. From the Data menu press to return to the Main Menu.
Once in the Main menu and the Start Guidance menu item is pressed using , the SmartPad II software will not go
directly to the real time page, first you will be presented with an additional menu page containing a single menu item,
As Applied, this is the file name that the As Applied data will be stored in. Figure 3-24 (right side) shows the As
Applied menu item.
Figure 3-23: Store As Applied Data Only
Figure 3-24: Starting Guidance and Storing As Applied Data