Lightbar test – TeeJet Swath XL SmartPad II User Manual
Page 49
Fieldware for Smartpad II
Software Version 4.03
Chapter 2 - Software Overview
2-27
SmartPad II Tools
Lightbar Test
The Lightbar Test diagnostic allows the users to determine if the SmartPad II is communicating to the lightbar. The
Lightbar Test diagnostic can also be used to determine if any of the guidance LEDs or LEDs in the text display are not
working properly.
To run the lightbar test program, highlight the Lightbar Test menu item using the
keys. Once highlighted
press
. This will automatically start the lightbar test program. The test consists of the guidance LEDs illuminating
by color, Green first, then all Yellow and finally Reds. Once the guidance LED test cycle is complete, the text display
will illuminate in a series of blocks, this will cycle a few times. The test is completed when the text display displays
End.
Figure 2-28: Lightbar Test