TeeJet Swath XL SmartPad II - Manual (Page 38)

2-16 Chapter 2 - Software Overview
Communications Setup
Fieldware for Smartpad II
Software Version 4.03
SmartPad II Setup
SmartPad II setup defines all parameters associated with the SmartPad II. There are two SmartPad II setup menu
items, Display Brightness and Display Backlight. SmartPad II Setup default values are listed in Table 2-5. These
menu items can adjusted using the buttons on the SmartPad II handheld. See Bulletin 98-01122 for button description.
The SmartPad II will default to menu settings when the unit is powered off.
To access the SmartPad II menu page, highlight the Setup menu item in the Main menu page and press . This takes
you to the Setup menu page, see Figure 2-17 (right side). With in the Setup Menu, select the SmartPad II menu item
using the arrow keys . Press to enter the SmartPad II menu page. Once in the SmartPad II menu page, you
can change any of the menu item settings by highlighting the desired menu item and pressing .
Figure 2-17: Accessing the SmartPad II Menu Page
Setting Name Default Value
Change at 1st
Time Start Up
Display Brightness 7 Optional
Display Backlight On Optional
Table 2-5: SmartPad II Menu Item Default Settings