TeeJet Swath XL SmartPad II - Manual (Page 182)

5-4 Chapter 5 - Field Mapping
Data Setup
Fieldware for Smartpad II
Software Version 4.03
Data Setup
Data setup will contain one menu item, boundary, the operator can choose to create a boundary or turn this option off.
If the boundary option is set to create during real-time application when the boundary feature is activated the bound-
ary will be drawn at the specified antenna location set in antenna setup. All points, lines and polygons will be stored
in the Map file once Start Mapper has been selected.
To access the Data menu page, highlight the Setup menu item in the Mapper Main menu page and press . This
takes you to the Setup menu page, see Figure 5-4. Within the Setup Menu select the Data menu item using the touch
screen or the arrow keys . Press to enter the Data menu page. Once in the Data menu page, you can
change the Boundary menu item by highlighting the menu item and pressing or using the touchscreen.
Figure 5-4: The Mapper Data Setup Menu