Altera PHYLite - Manual (Page 45)

Therefore, when migrating from the ALTDQ_DQS2 IP core to the Altera PHYLite for Parallel Interfaces
IP core, you must:
• Configure the Altera PHYLite for Parallel Interfaces IP core settings.
• Manually remove the ALTERA_PLL, ALTOCT and ALTDLL IP cores and their connections from the
rest of the design at the top level.
• Connect extra ports to and from the Altera PHYLite for Parallel Interfaces IP core in the top level
design.
Parameter Commonalities and Differences
To ease the manual migration process from the ALTDQ_DQS2 IP core to the Altera PHYLite for Parallel
Interfaces IP core, understanding the parameter commonalities and differences of the IP cores is crucial.
These figures and table show the ALTDQ_DQS2 IP core parameters.
Note: For the Altera PHYLite for Parallel Interfaces IP core parameters, refer to
Parameter Settings on
page 31
Figure 20: ALTDQ_DQS2 IP Core Parameter for Arria V and Cyclone V Devices
ug_altera_phylite
2015.01.16
Parameter Commonalities and Differences 45
Altera PHYLite for Parallel Interfaces IP Core User Guide Altera Corporation
Send Feedback