Altera CPRI v6.0 MegaCore Function User Manual
Page 30
Advertising
Note: You must select a simulator that is supported by the Quartus II v14.0 or v14.0 Arria 10 Edition
software, as appropriate.
9. Change directory to your specified testbench directory's
testbench/
<simulator vendor> subdirectory.
10.Execute the simulation script in the directory.
• In the Mentor Graphics ModelSim simulator, type
do run_altera_cpri_v6_tb.tcl
• In the Synopsys VCS-MX simulator, type
sh run_altera_cpri_v6_vcsmx_tb.sh
• In the Cadence NCSIM simulator, type
sh run_altera_cpri_v6_tb.sh
UG-01156
2014.08.18
Running the Testbench
2-19
Getting Started with the CPRI v6.0 IP Core
Altera Corporation
Advertising