Altera CPRI v6.0 MegaCore Function - Manual (Page 58)

Direct HDLC Serial RX Interface
Signal Name Direction Description
hdlc_rx_data
Output HDLC data stream received from the CPRI frame. The
hdlc_rx_valid
signal indicates which bits are valid
HDLC bytes.
Direct HDLC Serial TX Interface
Signal Name Direction Description
hdlc_tx_ready
Output When asserted, indicates the IP core is ready to receive
HDLC data from
hdlc_tx_data
on the next clock cycle.
hdlc_tx_valid
Input Write valid for
hdlc_tx_data
. Assert this signal to
indicate that
hdlc_tx_data
holds a valid HDLC bit in the
current clock cycle.
hdlc_tx_data
Input HDLC data stream to be written to the CPRI frame
directly. The IP core writes the current value on
hdlc_tx_
data
to the CPRI frame based on the
hdlc_tx_ready
signal from the previous cycle, and the
hdlc_tx_valid
signal in the current cycle.
Figure 3-20: Direct HDLC Serial RX Timing Diagram
HDLC Serial RX interface behavior in a CPRI v6.0 IP core running at 0.6144 Gbps.
cpri_clkout
hdlc_rx_ready
1 X X 0 1 0 1 0 hdlc_rx_data
Figure 3-21: Direct HDLC Serial TX Timing Diagram
Expected behavior on the HDLC Serial TX interface of a CPRI v6.0 IP core running at 0.6144 Gbps.
cpri_clkout
hdlc_tx_ready
hdlc_tx_valid
1 X X 0 1 0 1 0 hdlc_tx_data
Related Information
Avalon Interface Specifications
For more information about the Avalon-ST protocol, including timing diagrams, refer to the Avalon
Streaming Interfaces chapter.
3-28 Direct HDLC Serial Interface
UG-01156
2014.08.18
Altera Corporation Functional Description
Send Feedback