Altera CPRI v6.0 MegaCore Function - Manual (Page 8)

CPRI v6.0 IP Core Performance: Device Speed Grade Support
Table 1-3: Slowest Supported Device Speed Grades
Lower speed grade numbers correspond to faster devices. The entry -x indicates that both the industrial speed
grade Ix and the commercial speed grade Cx are supported for this device family and CPRI line bit rate.
CPRI Line Bit Rate (Gbps) Arria V GZ Stratix V GX Stratix V GT
0.6144
-4 -4 -3
1.2288
2.4576
3.072
4.9152
6.1440
9.8304 -3
-2 -2
10.1376
(1)
IP Core Verification
To ensure functional correctness of the CPRI v6.0 IP core, Altera performs extensive validation through
both simulation and hardware testing. Before releasing a version of the CPRI v6.0 IP core, Altera runs
comprehensive regression tests in the associated version of the Quartus ® II software.
Related Information
• Knowledge Base Errata for CPRI v6.0 IP core
Exceptions to functional correctness are documented in the CPRI v6.0 IP core errata.
Resource Utilization for CPRI v6.0 IP Cores
Resource utilization changes depending on the parameter settings you specify in the CPRI v6.0 parameter
editor. For example, with every additional interface you enable, the IP core requires additional resources
to implement the module that supports that interface.
(1) This CPRI line bit rate is not supported for this device family.
1-4 CPRI v6.0 IP Core Performance: Device Speed Grade Support
UG-01156
2014.08.18
Altera Corporation About the CPRI v6.0 IP Core
Send Feedback