BINDER VD 23 User Manual
Page 8
VDL (E2.1) 04/2014
page 8/107
8.
PROGRAM EDITOR ............................................................................................. 54
8.1
Selecting between set-point ramp and set-point step ....................................................................... 54
8.1.1
Programming with setting “Ramp” (default setting) ................................................................ 54
8.1.2
Programming with setting “step” ............................................................................................. 57
8.1.3
General notes on programming temperature transitions ........................................................ 58
8.2
Set-point entry for program operation ............................................................................................... 58
8.3
Program table template ..................................................................................................................... 61
8.4
Deleting a program section ............................................................................................................... 62
9.
PROGRAM START LEVEL .................................................................................. 63
10.
USER LEVEL ....................................................................................................... 66
11.
PERFORMANCE IN CASE OF FAILURES .......................................................... 72
11.1
Performance after power failures ...................................................................................................... 72
11.2
Alarm messages ............................................................................................................................... 72
12.
SAFETY DEVICE CLASS 2 (DIN 12880) ............................................................. 72
13.
REFERENCE MEASUREMENTS. CHECKING THE TEMPERATURE IN THE
INNER CHAMBER ................................................................................................ 74
14.
COMMISSIONING THE VACUUM ....................................................................... 74
14.1
Evacuation ......................................................................................................................................... 75
14.2
Breaking the vacuum (flooding with ambient air) .............................................................................. 75
14.3
Operation with inert gas .................................................................................................................... 75
15.
OPTIONS .............................................................................................................. 76
15.1
ATEX connection kits for vacuum pumps VP4 or VP5 (option) ........................................................ 76
15.2
Vacuum module empty (without pump) (option) ............................................................................... 77
15.3
Vacuum module with chemical membrane pump VP4 or VP5 (option) ............................................ 79
15.4
Additional measuring channel for digital object temperature display with flexible Pt 100 temperature
sensor (option) .................................................................................................................................. 82
15.5
Measuring access port vacuum 9 poles (option) ............................................................................... 84
15.6
Communication software APT-COM™ 3 DataControlSystem (option) ............................................. 84
16.
MAINTENANCE, CLEANING, AND SERVICE ..................................................... 85
16.1
Maintenance intervals, service .......................................................................................................... 85
16.2
Cleaning and decontamination .......................................................................................................... 86
16.2.1
Cleaning .................................................................................................................................. 86
16.2.2
Decontamination ..................................................................................................................... 87
16.3
Sending the unit back to BINDER GmbH .......................................................................................... 89
17.
DISPOSAL ............................................................................................................ 89
17.1
Disposal of the transport packing ...................................................................................................... 89
17.2
Decommissioning .............................................................................................................................. 90
17.3
Disposal of the unit in the Federal Republic of Germany .................................................................. 90
17.4
Disposal of the unit in the member states of the EC except for the Federal Republic of Germany .. 91
17.5
Disposal of the unit in non-member states of the EC ........................................................................ 93
18.
TROUBLESHOOTING ......................................................................................... 93
19.
TECHNICAL DESCRIPTION ................................................................................ 95
19.1
Factory calibration and adjustment ................................................................................................... 95
19.2
VDL technical data ............................................................................................................................ 95
19.3
Equipment and Options ..................................................................................................................... 97