BINDER VD 23 - Manual (Page 97)

VDL (E2.1) 04/2014 page 97/107
19.3 Equipment and Options
To operate the vacuum drying oven VDL, use only original BINDER accessories or accesso-
ries / components from third-party suppliers authorized by BINDER. The user is responsible for
any risk arising from using unauthorized accessories.
Regular equipment
Microprocessor program controller RD3 with LED display
Safety device class 2 according to DIN 12880
RS 422 printer and communication interface with adjustable printing intervals
Fine-dosing aeration valve
Inert gas connection with fine-dosing valve
Analog pressure display (manometer) (not with option digital pressure display)
Pressure switch for heating release (at pressure < 125 ± 25 mbar / 3.69 ±0.74 inHg)
Area for electrical equipment swept with compressed air or inert gas with monitoring of the minimum sup-
ply pressure
Measuring connection (DN 16), rear
Safety glass panel
Intelligent adaptation of the heating power by soft heating-up function (selectable on-off)
Options / accessories
Expansion racks, aluminum or stainless steel 1.4571
FKM door gasket (temperature resistant up to 200 °C / 392°F)
Additional measuring channel for digital object temperature display with flexible Pt 100 temperature sen-
sor
Communication software APT-COM™ for logging and display of temperature data and networking up to
30 units with PC
ATEX connection kits for pumps VP4 (MZ2C EX) or VP5 (MD4C EX) with various small flange parts
Measuring access port vacuum 9 poles
Vacuum module with chemical membrane pump VP4 (MZ2C EX) with separator and emission condenser,
ready for connection
•
Ready to connect: Suction power m 3 /h 1.9
• End vacuum mbar / inHg 12 / 0.35
• Electrical connection (50 Hz) V 230 / 1 N~
Vacuum module with chemical membrane pump or VP5 (MD4C EX) with separator and emission con-
denser, ready for connection
•
Ready to connect: Suction power m 3 /h 3.7
• End vacuum mbar / inHg 3 / 0.09
• Electrical connection (50 Hz) V 230 / 1 N~
Factory calibration certificate
Extension to factory calibration certificate (additional value)
Calibration certificate of object temperature display
Qualification folder
Evaporating dish with rim, small or large
Stable table on wheels with castors and locking brakes