BINDER VD 23 - Manual (Page 95)

VDL (E2.1) 04/2014 page 95/107
19. Technical description
19.1 Factory calibration and adjustment
This unit was calibrated and adjusted in the factory. Calibration and adjustment were performed using
standardized test instructions, according to the QM DIN EN ISO 9001 system applied by BINDER (certi-
fied since December 1996 by TÜV CERT). All test equipment used is subject to the administration of
measurement and test equipment that is also a constituent part of the BINDER QM DIN EN ISO 9001
systems. They are controlled and calibrated to a DKD-Standard at regular intervals.
Factory adjustment was done in the center of the usable volume and under vacuum conditions. The sen-
sor is fixed in the middle of the expansion rack in a way ensuring good thermal conductivity (heat conduc-
tion). Measuring is performed in equilibrated state.
CAUTION
Invalid calibration.
∅
Do NOT change between aluminum and stainless steel racks.
 Use the delivered expansion racks only.
19.2 VDL technical data
Unit size 23 53 115
External dimensions
Vacuum oven
Width mm / inch 515 / 20.28 634 / 24.96 740 / 29.13
Height (incl. feet) mm / inch 655 / 25.79 775 / 30.51 900 / 35.43
Depth mm / inch 500 / 19.69 550 / 21.65 670 / 26.38
Vacuum module (option)
Width mm / inch 515 / 20.28 634 / 24.96 740 / 29.13
Height mm / inch 624 / 24.57 624 / 24.57 622 / 24.49
Depth mm / inch 500 / 19.69 550 / 21.65 670 / 26.38
Vacuum oven with op-
tion vacuum module
Width mm / inch 515 / 20.28 634 / 24.96 740 / 29.13
Height mm / inch 1279 / 50.35 1400 / 55.12 1522 / 59.92
Depth mm / inch 500 / 19.69 550 / 21.65 670 / 26.38
Plus door handle, connections (depth) mm / inch 100 / 3.94 100 / 3.94 100 / 3.94
Wall clearance at the back mm / inch 100 / 3.94 100 / 3.94 100 / 3.94
Wall clearance at the side mm / inch 135 / 5.31 135 / 5.31 135 / 5.31
Internal dimensions
Width
mm / inch 285 / 11.22 400 / 15.75 506 / 19.92
Height mm / inch 285 / 11.22 400 / 15.75 506 / 19.92
Depth mm / inch 295 / 11.61 340 / 13.38 460 / 18.11
Interior volume l / cu.ft. 23 / 0.8 53 / 1.9 115 / 4.1
Number of expansion racks (aluminum) regular / max 2/4 2/5 2/6
Distance between the racks mm / inch 53 / 2.09 62 / 2.44 68 / 2.68
Usable space per rack (width x depth) mm / inch
234 x 280 /
9.21 x 11.02
349 x 320 /
13.74 x 12.60
455 x 440 /
17.91 x 17.32
Permissible load per rack Kg / lbs 20 / 44 20 / 44 20 / 44
Permissible total load Kg / lbs 35 / 77 45 / 99 65 / 143
Weight (empty) Kg / lbs 63 / 139 95 / 209 153 / 337