CIRCUTOR AR6 Series - Manual (Page 12)

AR6 portable network analyzer
Page 12 of 69 User Manual
2.3.4 Expansion module
This module is not supplied in standard analyzers. The arrow indicates only the positioning of
the slot for possible expansion modules. If the user has purchased a special measurement
module to extend the features of the standard analyzer, this is where expansion modules are
installed. The features of each one of the expansion modules are found in their respective
particular manuals.
2.3.5 Auxiliary power supply
This is the slot for the AR6 power supply connector. See the power supply features in chapter 4,
entitled TECHNICAL FEATURES.
3 INSTRUCTIONS FOR USE
The AR6 analyzer is a configurable measuring instrument that may be used in different ways,
which the user may select by means of different menu choices. It allows configuration of
different measuring methods, various recording times and log and trip conditions. Functions like
snapshots, averaging, rebooting maximum and minimum values display, wave shapes display,
rate of harmonic distortion, active and reactive power, both inductive and capacitive, energy
consumed and generated, among many other parameters can be displayed and/or recorded.
In order to ensure correct operation, carefully read the instructions given in this manual before
beginning measurements.
WARNING: Read this manual before using the analyzer.
If the analyzer is used in a manner other than that specified by the manufacturer, its
protection may be compromised.