CIRCUTOR AR6 Series - Manual (Page 45)

AR6 portable network analyzer
User Manual Page 45 of 69
13.3 ACCUMULATED ENERGY SCREEN
This screen shows the accumulated values of consumed and generated energy from the last
reset of the energy meters.
Fig. 13-4.- Example of accumulated energies screen
Viewed parameters:
• Active energy, kWh
• Capacitive reactive energy, KvarCh,
• Inductive reactive energy, KvarLh,
• Apparent energy, kvah,
Energies consumed and generated are
shown separately for all of them
The dynamic menu options for this screen are the same as those indicated in the beginning of
section 0.
13.4 MAXIMUM DEMAND SCREEN
This screen measures the maximum or instantaneous energy demand values.
Fig. 13-5.- Example of a maximum demand screen
(instantaneous value)
Displayed parameters:
• Total active power [kW] of LIII
• Total apparent power [kVA] of
LIII
• Total current by phase [A] of
LIII, L1, L2, L3.
The dynamic menu options for this screen are the same as those indicated in the beginning of
section 0 , except for the VIEW menu, which only has the instantaneous and maximum options.
14 PHASORS MENU
The screen shows the phasors representation of the voltages and currents of each
phase and the phase angle of each of them with respect to the voltage in L1.
Displayed Parameters:
•
Phasors of V and I
•
Modules of V and I and
phase angles referred to V1
•
Angles between phases
(L1-L2, L2-L3 and L1-L3)
for V and I
•
Phase shift between V and
I of different phases.
•
Phase sequence.
Fig.14-1.-Phasors screen