5 logs location, 6 file downloading, 20 software update – CIRCUTOR AR6 Series User Manual
Page 66: 21 power vision plus, Ocation of logs, File, Downloading, Software update, Power vision plus
AR6 portable network analyzer
Page 66 of 69
User Manual
19.5 LOGS LOCATION
The recorded files are located in the internal memory of the analyzer, in the subdirectory
DB_Measures.
Subdirectories as well as measurements/configurations that may have been created are
all found in this subdirectory.
The AR6 analyzer always measures, calculates and records according to an active
measurement configuration (see CONFIGURATION), thus the recording files stored in
the subdirectory corresponding to the measurement active at the time of recording.
19.6 FILE DOWNLOADING
• Switch on the analyzer and enable the analyzer's USB port communication using
the USB Configuration function.
• Connect the analyzer to the PC using the supplied USB cable and the computer
will detect the analyzer and recognise it as an external drive.
• Recover the files from the corresponding measurement file on the external drive
unit.
Do not leave the USB activation screen to communicate with the analyzer as the
unit modifies the port configuration when the user exits this screen.
20 SOFTWARE UPDATE
Updating removes *.EVQ, *.PHO and *.REC files due to a change in its their
internal structure. Make sure to copy the data stored on the memory before
the user update the analyzer.
To update the AR6 analyzer the user must download the firmware version from the CIRCUTOR
web site:
Follow the steps indicated in the update manual. The steps may vary depending on the unit
version.
21 POWER VISION PLUS
Power Vision Plus is the software that lets the user download and manage the data logged by
the AR6 network analyzer.