CIRCUTOR AR6 Series - Manual (Page 3)

AR6 portable network analyzer
User Manual Page 3 of 69
SAFETY INSTRUCTIONS
Follow the warnings in this manual, which are indicated using the following symbols.
DANGER: Warns of a risk, which could result in personal injury or material damage.
WARNING: Indicates that special attention should be paid to a specific point.
Incorrect connection, handling or maintenance of the unit may result in death, serious
injuries or fire hazard. Avoid handling the device while it is connected to the power
supply.
Follow the installation and maintenance instructions throughout the unit's entire working
life. Specifically, follow the recommended installation instructions in the user country’s
Electrical Code or Regulations.
If the unit must be installed in areas with high-voltage (HV) equipment, the personnel
involved must be properly trained and authorised to operate in areas with high-voltage
risk.
Always wear the necessary personal protective equipment.
ATTENTION
If the instructions preceded by the WARNING symbol are not respected or followed
correctly, this could cause personal injury or damage to the unit and/or installations.
The unit must be connected to the external power supply using suitable over-current
protection device and a switch that can disconnect it from the power supply.
Disclaimer
CIRCUTOR, SA reserves the right to modify the units or their specifications appearing in this manual
without prior notice.
The CIRCUTOR guarantee is two years from the purchase date and is limited to refunding the purchase
price, free repair or replacement of the defective unit, if the unit is returned to the CIRCUTOR after-sales
service within the guarantee period.
CIRCUTOR, SA supplies its customers with the latest versions of the unit specifications and instruction
manuals on its website: www.circutor.com.
Recommendations before using the unit
The energy supply must be switched off and the unit disconnected before handling, changing the
connection or replacing units.
It is important to only use the original connection cables and accessories that come with the unit. These
products are specially designed to be used with this device and meet current safety standards.
The unit manufacturer is not liable for any damage caused by users or installers not complying with the
warnings and/or recommendations that appear in this manual, nor for damage caused by using non-
original products and accessories.
Inspect the working area prior to installation. Do not use the device in hazardous areas or where there is
a risk of explosion. Avoid using the device in damp locations