Figure 4-88, Ee f igure 4-88 – AGI Security SYS-HC0851S2 User Manual
Page 136
127
Snapshot: System can snapshot corresponding channel when an alarm occurs.
Please note the activation snapshot has the higher prior ity than schedule snapshot. If
you have enabled these two types at the same time, system can activate the
activation snapshot when alar m occurs, and other wise system just operates the
schedule snapshot.
Buzzer: Highlight the icon to enable this function. The buzzer beeps when alarm
occurs.
Please note, network alarm means the alarm signal from the TCP/IP. You can use
NET SDK to activate network alarm. Comparing with the local alarm, there is no type ,
anti-dither, alarm upload function.
Please highlight icon
to select the corresponding function. After setting all the
setups please click save button, system goes back to the previous menu.
Figure 4-88