AGI Security SYS-HC0851S2 - Manual (Page 183)

174
Important
 For multiple-channel monitor mode, system adopts extra stream to monitor by default.
You can not modify manually. All channels are trying to synchronize. Please note the
synchronization effect still depends on your network environments.
 For bandwidth consideration, system can not support monitor and playback at the
same time. System auto closes monitor or playback interface when you are searching
setup in the configuration interface. It is to enhance search speed.
5.8 Setup
5.8.1 Camera
5.8.1.1 Remote Device (For digital channel only)
Remote device interface is shown as below. See Figure 5-15.
Figure 5-15
Figure 5-16