3 tampering, 2 alarm – AGI Security SYS-HC0851S2 User Manual
Page 209
Advertising
200
Figure 5-56
5.8.3.1.3 Tampering
The tampering interface is shown as in Figure 5-57.
After analysis video, system can generate a tampering alarm when the detected moving
signal reached the sensitivity you set here.
For detailed setups, please refer to chapter 5.8.3.1.1 motion detect for detailed
information.
Figure 5-57
5.8.3.2 Alarm
Advertising
This manual is related to the following products: