AGI Security SYS-HC0851S2 - Manual (Page 212)

203
Parameter Function
Send Email If you enabled this function, System can send out an email
to alert you when an alarm occurs.
Tour You need to check the box here to enable this function.
System begins 1-wiindow or multiple-window tour display
among the channel(s) you set to record when an alarm
occurs.
PTZ Activation Here you can set PTZ movement when alarm occurs.
Such as go to preset X.
5.8.3.2.2 Net Alarm
The network alarm interface is shown as in Figure 5-61.
Network alarm refers to the alarm signal from the network. System does not anti -dither
and sensor type setup. For setup information, please refer to chapter 5.8.3.2.1.
Figure 5-61
5.8.3.3 Abnormality
It includes two types: No disk, disk error, disk no space, net disconnection, IP conflict and
MAC conflict. See Figure 5-62 and Figure 5-63.