AGI Security SYS-HC0851S2 - Manual (Page 191)

182
Figure 5-25
Please refer to the following sheet for detailed information.
Parameter Function
Mode There are two modes: static mode and the DHCP mode.
 The IP/submask/gateway are null when you select the
DHCP mode to auto search the IP.
 If you select the static mode, you need to set the
IP/submask/gateway manually.
 If you select the DHCP mode, you can view the
IP/submask/gateway from the DHCP.
 If you switch from the DHCP mode to the static mode, you
need to reset the IP parameters.
 Besides, IP/submask/gateway and DHCP are read-only
when the PPPoE dial is OK.
Mac Address It is to display host Mac address.
IP Version It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
IP Address Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
Preferred DNS DNS IP address.
Alternate DNS Alternate DNS IP address.
For the IP address of IPv6 version, default gateway, preferred DNS and
alternate DNS, the input value shall be 128-digit. It shall not be left in blank.
LAN load
System can process the downloaded data first if you enable this
function. The download speed is 1.5X or 2.0X of the normal
speed.
5.8.2.2 Connection
The connection interface is shown as in Figure 5-26.