AGI Security SYS-HC0851S2 - Manual (Page 172)

163
user. If you leave this item in blank, any MAC address user can share this user account to
login. Please note system needs to check the validity of MAC. Only the 12-digit 0-f format
address can pass the validity verification. System only saves small character even you
input capitalized one. You can see the corresponding pro mpt if there is any illegal input.
4.10.5.7 Auto Maintain
Here you can set auto-reboot time and auto-delete old files setup. You can set to delete
the files for the specified days. See Figure 4-138.
You can select proper setup from dropdown list.
After all the setups please click save button, system goes back to the previous menu.
Figure 4-138
4.10.5.8 Config Backup
The configuration file backup interface is shown as below. See Figure 4-139.
This function allows you to import/export system configuration . You can use this function
when there are several devices need the same setup.
 Export: Please connect the peripheral device first and then go to the following
interface. Click Export button, you can see there is a corresponding
“Config_Time”
folder. Double click the folder, you can view some backup files.
 Import: Here you can import the configuration files from the peripheral device to
current device. You need to select a folder first. You can see a dialogue box asking
you to select a folder if you are selecting a file. System pops up a dialogue box if
there is no configuration file under current folder. After successfully import, system
needs to reboot to activate new setup.