AGI Security SYS-HC0851S2 - Manual (Page 156)

147
 Auto logout: Here is for you to set auto logout interval once login user remains
inactive for a specified time. Value ranges from 0 to 60 minutes.
 IPC Time Sync: You can input an interval here to synchronize the DVR time and IPC
time.
 Navigation bar: Check the box here, system displays the navigation bar on the
interface.
 Startup wizard: Once you check the box here, system will go to the startup wizard
directly when the system restarts the next time. Other wise, it will go to the login
interface.
 Mouse property: You can set double click speed via dragging the slide bard. You can
Click Default button to restore defau lt setup.
Figure 4-119
4.10.5.1.2 Date and Time
The interface is shown as in Figure 4-120.
 Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or
DD- MM-YYYY.
 Date separator: There are three denotations to separate date: dot, beeline and
solidus.
 DST: Here you can set DST time and date. Here you can set start time and end time
by setting corresponding week setup or by setting corresponding date setup.
 NTP: It is to set NTP server information.