Marantz AV8003 User Manual
Page 40
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
REMOTE
CONTROLLER
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
SETUP
37
ENGLISH
6 ACOUSTIC EQ
This display is for setting up the equalizer and
changing the Equalizer mode.
• PRESET G. EQ ADJ :
“6-1 PRESET G. EQ ADJ” (see page 38)
• CHECK AUTO 1 & 2 :
“6-2 CHECK AUTO” (see page 38)
EQ MODE:
There are 4 equalizer modes to choose from:
PRESET G. EQ that allows the user to manually
adjust the equalizer, and AUDYSSEY, FRONT and
FLAT that automatically adjust the equalizer from the
measurement results of the AUTO SETUP feature
(see page 27).
FRONT:
This mode matches the characteristics of each
speaker to those of the front speakers.
FLAT:
This mode fl attens the frequency characteristics of
all speakers. It is suited for playback of multichannel
music such as Dolby Digital and DTS.
AUDYSSEY:
This mode adjusts the frequency characteristics
of all speakers so as to create the best listening
environment for the sound characteristics of the
listening room.
PRESET:
This mode adjusts the graphic equalizer that
was set in PRESET G.EQ ADJ to adjust the
characteristics of each speaker (see page 38).
OFF:
The graphic equalizer is not used.
1.
Select
“6. ACOUSTIC EQ” from MAIN MENU
with the
3
or
4
cursor buttons and press the
ENTER button.
6 . A C O U S T I C E Q .
E Q . M O D E :
O F F
P R E S E T G . E Q A D J
C H E C K A U T O
R E T U R N
N E X T
E X I T
2.
Select
“EQ. MODE” with the
3
or
4
cursor
buttons.
3.
Select
“FRONT”, “FLAT”, “AUDYSSEY”,
“PRESET” or “OFF” with the
1
or
2
cursor
buttons.
After you complete this portion of the setup, move the
cursor to “RETURN” with the
3
,
4
,
1
and
2
cursor
buttons and press the ENTER button.
To use the remote controller (RC2001) to change
the EQ MODE, switch the remote controller to
AMP mode, and press the < / > button until 003
is displayed. When EQ is displayed on the remote
controller, press the EQ button.
=
Each time this button is pressed, the EQ MODE
changes as follows.
OFF
FRONT
FLAT
PRESET
AUDYSSEY
Notes:
• “FRONT”, “FLAT” and “AUDYSSEY” can be
selected after executing the AUTO SETUP feature.
• If a speaker that was determined “NON” in Auto
Setup is manually turned on, the “FRONT”, “FLAT”
and “AUDYSSEY” modes cannot be selected.
• The equalizer turns off when the Pure Direct mode,
Source Direct mode, Dolby Headphone or Virtual
mode is set.
• ACOUSTIC EQ MODEs are not used during
playback of Dolby TrueHD, Dolby Digital Plus, or
DTS-HD signals.
• Tone Control is disabled when an EQ MODE is in
use.
6 . A C O U S T I C E Q .
E Q . M O D E :
O F F
P R E S E T G . E Q 1 A D J
C H E C K A U T O
R E T U R N
N E X T
E X I T
P R E S E T A D J U S T
R E S E T :
A L L C H
6 3 - 1 5 . 0
C H : S R 1 2 5 - 2 . 5
2 5 0 - 5 . 0
5 0 0 + 9 . 0
1 k + 3 . 5
2 k - 5 . 5
4 k - 7 . 0
8 k - 1 8 . 5
1 6 k - 2 0 . 0
R E T U R N
E X I T
63
125 500
2k
8k
250 1k
4k
16k
+9
0dB
C H E C K A U T O
M D :
A U D Y S S E Y
6 3 - 1 5 . 0
C H : S R 1 2 5 - 2 . 0
2 5 0 - 5 . 0
5 0 0 + 9 . 0
1 k + 3 . 0
2 k - 5 . 0
4 k - 7 . 0
8 k - 1 8 . 0
1 6 k - 2 0 . 0
R E T U R N
E X I T
63
125 500
2k
8k
250 1k
4k
16k
+9
0dB
-20
-20
AV8003_U_Eng.indb 37
AV8003_U_Eng.indb 37
08.4.28 10:40:15 AM
08.4.28 10:40:15 AM