Marantz AV8003 User Manual
Page 9
CONNECTIONS
NAMES AND
FUNCTION
SETUP
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
REMOTE
CONTROLLER
TROUBLESHOOTING
OTHERS
ENGLISH
6
FL DISPLAY AND INDICATER
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DISC 6.1
DIRECT
MT X 6.1
DIGITAL
SURROUND
PCM
L
C
R
SL S SR
LFE
EQ
M-DAX
M-DAX
¡8
g
s
a
¡9
¡7
¡5
™0
¡6
h k
l ¡1
¡3
f
j ¡0 ¡2
¡4
d
™1
a
DISP (Display Off) indicator
This indicator is illuminated when this unit is in the
display off mode.
s
SLEEP timer indicator
This indicator is illuminated when the sleep timer
function in the main-zone is in use.
d
MULTI (Zone system) indicator
This indicator is illuminated when the zone system
is active.
f
AUTO
SURR
(Auto Surround mode) indicator
This indicator is illuminated to show that the AUTO
SURROUND mode is in use.
g
TUNER’s
indicators
AUTO : This indicator illuminates when the
tuner’s Auto mode is in use.
TUNED : This indicator illuminates when the
tuner receives a suffi ciently strong
radio signal.
ST(Stereo) : This indicator illuminates when an
FM station is being tuned into stereo
condition.
h
DTS-ES mode indicators (DISC6.1, MTX6.1)
These indicators will illuminate to show the DTS-ES
decoding mode (Discrete 6.1 or Matrix 6.1).
j
V (video)-OFF mode indicator
This indicator is illuminated when the Video-OFF
function is active.
k
NIGHT mode indicator
This indicator is illuminated when this unit is in the
Night mode, which reduces the dynamic range of
digital program material at low volume levels.
l
PEAK
indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than the capable level of internal processing,
this will illuminate. If this happens, you should press
the ATT button. (See page 70)
¡0
EQ
indicator
This indicator is illuminated when the EQ MODE is
selected to “AUDDYSSEY”, “FRONT” or “FLAT”.
¡1
ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
¡2
DIGITAL Input Indicator
This indicator is illuminated when a digital input has
been selected.
¡3
ANALOG input indicator
This indicator is illuminated when an analog input
source has been selected.
¡4
SIGNAL FORMAT indicators
2
DIGITAL
This indicator is illuminated when a Dolby Digital
signal is input.
EX
This indicator is illuminated when a Dolby Digital EX
signal is input.
dts
This indicator is illuminated when a DTS signal is
input.
ES
This indicator is illuminated when a DTS ES signal
is input.
96/24
This indicator is illuminated when a DTS 96/24 signal
is input.
PCM
This indicator is illuminated when the input signal is
PCM (pulse code modulation).
2
SURROUND
This indicator is illuminated when a Dolby Surround
signal is input.
¡5
HDMI
indicator
This indicator is illuminated when the HDMI device is
connected to the unit.
¡6
ENCODED CHANNEL STATUS indicators
These indicators display the channels that are
encoded with a digital input signal.
If the digital input signal is Dolby Digital 5.1ch or
DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be
illuminated.
If the digital input signal is 2 channel PCM-audio, “L”
and “R” will be illuminated.
If the digital input signal is 7.1 channel PCM-audio.
“L”, “C”, “R”, “SL”, “S” , “SR” and “LFE” will be
illuminated.
If the digital input signal is Dolby Digital 5.1ch signal
with Surround EX fl ag or DTS-ES, “L”, “C”, “R”, “SL”,
“S” , “SR” and “LFE” will be illuminated.
Note:
When the unit is decoding Dolby TrueHD, the input
signal status displayed depends on the number of
channels of the speakers used.
If a 7.1-channel signal is supplied for a 5.1-channel
speaker system (L/C/R/SL/SR/SW), the “S” indicator
is not illuminated.
¡7
HDCD
indicator
This indicator is illuminated when the HDCD signal is
decoded from digital input signal.
¡8
Main Information Display
This display shows messages relating to the status,
input source, surround mode, tuner, volume level or
other aspects of unit’s operation.
¡9
DIRECT
indicator
This indicator is illuminated when this unit is in the
SOURCE DIRECT mode. PURE DIRECT mode or
7.1ch input mode.
™0
M-DAX
indicator
This indicator illuminates when this unit is in the M-
DAX mode.
™1
PURE DIRECT indicator
This indicator is illuminated when this unit is in the
PURE DIRECT mode.
AV8003_U_Eng.indb 6
AV8003_U_Eng.indb 6
08.4.28 10:40:04 AM
08.4.28 10:40:04 AM