Marantz AV8003 User Manual
Page 85
CONNECTIONS
SETUP
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
REMOTE
CONTROLLER
82
ENGLISH
BASIC OPERATION
RC2001 BUTTON SETTINGS
The Wizz.it 3 editor software can be used to make
the settings for the IR Command, LINK, JUMP, One
Touch Operation (Macro) and other functions in the
RC2001.
This enables a customized user interface, optimized
for the customer’s environment, to be built.
The Wizz.it 3 editor software can be downloaded
from www.marantz.com. For more information about
the setting procedures, see the PC Editor Software
Wizz.it 3 User Guide.
This is the basic operation procedure for the
RC2001.
1.
Press the Home button to enter Home mode for
the RC2001.
2.
Select the devices that are set in Home mode.
3.
Perform operation of the device that you want
to control in the selected device mode.
4.
To control another device, return to Home
mode and select another device.
The preinstalled default user fi le is used to control
Marantz products. The AV receiver device input
switching code is assigned to the button next to the
displayed device name of the device mode.
Example:
After DVD mode is selected in the remote controller,
pressing the button next to DVD, shown in the fi rst
column in the LCD, transmits the AV receiver DVD
input command.
DVD input command for Marantz AV Receiver.
SLEEP TIMER
The SLEEP TIMER is a function that sends a preset
remote command after the sleep time has elapsed.
• The setting is made using the Wizz.it 3 editor, and
the buttons that are assigned to the sleep timer are
operated as shown below.
• This is a convenient function for devices that do
not have a sleep timer or for setting the sleep timer
using multiple devices.
• The RC2001 performs regular operation even
when the sleep timer is activated.
1.
Press the button that will be assigned to the
sleep timer. The message “PROCEED?” is
displayed on the LCD.
2.
Each time the button is pressed, the sleep
setting time changes in the cycle shown
below.
PROCEED?
SLEEP 30
SLEEP 60
SLEEP OFF
SLEEP 120
SLEEP 90
3.
When the time that you want to set is displayed,
wait at the setting for three seconds.
• The sleep setting screen is no longer
displayed on the LCD, and the sleep timer
is automatically started.
And the sleep timer icon is displayed in Sub
Info area of the LCD.
• When the remaining time for the sleep timer
setting is 10 minutes, the remaining time is
displayed in the SubInfo area of the LCD.
SLEEP TIMER
icon
MAIN MENU
The various settings for the remote device are made
in the main menu.
ENTERING THE MAIN MENU
1.
Press the Home button to enter Home mode for
the RC2001.
2.
Hold down the Home button and Menu button
at the same time for three seconds to display
MAIN MENU on the LCD.
1. LEARNING FUNCTION
1.
Place the remote controller so that its infrared
signal transmitter is facing the infrared signal
receiver on the Marantz remote controller at a
distance of about 2 inchs (5 cm).
2.
Display the MAIN MENU on the LCD of the
RC2001, and then press the button next to the
“LEARNING” indicator.
3.
The screen appears as shown below. Either
press the ENTER button or wait for three
seconds.
AV8003_U_Eng.indb 82
AV8003_U_Eng.indb 82
08.4.28 10:40:41 AM
08.4.28 10:40:41 AM