Marantz AV8003 User Manual
Page 87
CONNECTIONS
SETUP
BASIC
OPERA
TION
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
REMOTE
CONTROLLER
84
ENGLISH
2. TIMER
The timer function of the RC2001 can be used
to send a preset remote controller command at a
programmed time.
The Wizz.it 3 editor can be used to operate multiple
devices. One Touch Operation (Macro) can also use
the timer function for transmission.
Checking the Settings
1.
Display the MAIN MENU on the LCD of the
RC2001, then press the button next to the
“TIMER” indicator.
2.
The TIMER menu is displayed. Pressing the
button next to the “CHECK” indicator on the
LCD displays the timer settings.
When the LCD appears as shown below, the
timer has not been set.
• Either press the ENTER button or wait three
seconds for the LCD to automatically return
to the MAIN menu.
• Pressing the Home button from the TIMER
MENU screen returns the LCD to the MAIN
MENU.
Operation Settings
1.
Press the button next to the “TIMER SET”
indicator in the LCD in the TIMER menu
screen to display the timer programming
setting screen.
2.
Use the numeric buttons (0 to 9) and cursor
buttons (
t
and
u
) to set the time for the timer.
After making the setting, press the ENTER
button.
3.
Home mode is shown in the LCD. Select the
commands and devices for the commands that
will be sent by timer programming.
• If a command assigned to the HARD
button is to be sent by timer programming,
press the HARD button when selecting the
command to make the setting.
• If a command assigned to the SOFT button
is to be sent by timer programming, use
the < and > buttons when selecting the
command to move the page, and select the
command assigned to the SOFT button.
Note:
The timer setting for the SOFT button cannot be used
in Home mode.
4.
Press a button next to the “EVERYDAY” or
“ONE TIME” indicators on the LCD to set timer
operation to either everyday or one-time only
operation.
• The timer settings are displayed. Check that
the settings are correct.
Setup time
Device name
HARD or SOFT
button
Key name
EVERYDAY or
ONE TIME
• Either press the ENTER button or wait
three seconds so that “COMPLETED” is
displayed on the LCD and the operation
settings are automatically completed.
• Either press the ENTER button or wait three
seconds for the LCD to automatically return
to the MAIN menu.
AV8003_U_Eng.indb 84
AV8003_U_Eng.indb 84
08.4.28 10:40:42 AM
08.4.28 10:40:42 AM