Marantz AV8003 - Manual (Page 69)

CONNECTIONS
SETUP
BASIC
OPERA
TION
REMOTE
CONTROLLER
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
ADV
ANCED
OPERA
TION
66
ENGLISH
ZONE SYSTEM
The Zone System mode allows the same source or
different sources to be heard in two ZONEs other
than where this unit is installed.
To use the zone system, connect the audio from the
ZONE OUT A and B AUDIO output terminals to the
ZONE A and B amps.
Connect the VIDEO output (ZONE OUT) terminal to
the monitor in Zone A.
(ZONE OUT terminal is linked to the source selector
in Zone A.)
If a surround channel back speaker or speaker C
(see page 19) are not used in the ZONE where this
unit is installed, the zone speaker system can be
used with the amp for the surround back channel.
Also, the COMPONENT VIDEO MONITOR OUT
2 terminal can be used for the monitor output of
ZONE A.
This unit supports zone system functions such as
source selectors, OSD menu systems, sleep timers
and remote control.
ZONE PLAYBACK USING THE ZONE OUT
TERMINALS
TOP TOP
ZONE ZONE SPEAKER SPEAKER
DISPLAY DISPLAY INPUT INPUT 7.1CH 7.1CH DIRECT DIRECT PURE PURE
PHONES PHONES
THX THX M-DAX M-DAX
MODE MODE SURROUND SURROUND CLEAR CLEAR MEMORY MEMORY T-MODE T-MODE BAND BAND EXIT EXIT MENU MENU ZONE ZONE
DOWN DOWN
VOLUME VOLUME
UP UP
INPUT INPUT SELECTOR SELECTOR
AUTO AUTO
SETUP MIC SETUP MIC
HDMI HDMI
M-DAX M-DAX
PURE DIRECT PURE DIRECT
POWER ON/OFF POWER ON/OFF
STANDBY STANDBY
AV PRE TUNER AV8003 AV PRE TUNER AV8003
ENTER ENTER
3. 4. 1.
1. Pressing the ZONE button on the unit one time
accesses the ZONE A settings. Pressing it two
times accesses the ZONE B settings. Then,
pressing it a third time turns the zone feature
off.
2. When the ZONE setting mode is engaged, one
of the following screens appears on the display
for 10 seconds.
* Display when ZONE A is selected
Z A D V D - 1 8 d B
* Display when ZONE B is selected
Z B D V D - 1 8 d B
3. Select an input source with the INPUT
SELECTOR knob.
4. Turn the VOLUME knob to set the volume of
the ZONE used in the zone system as you
like.
Note:
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU.
(See page 36)
ZONE PLAYBACK USING THE SURROUND
BACK PREOUT TERMINALS
This unit allows you to connect another set of power
amp and place them in a different ZONE or separated
area for Iistening to music.
TOP TOP
ZONE ZONE SPEAKER SPEAKER
DISPLAY DISPLAY INPUT INPUT 7.1CH 7.1CH DIRECT DIRECT PURE PURE
PHONES PHONES
THX THX M-DAX M-DAX
MODE MODE SURROUND SURROUND CLEAR CLEAR MEMORY MEMORY T-MODE T-MODE BAND BAND EXIT EXIT MENU MENU ZONE ZONE
DOWN DOWN
VOLUME VOLUME
UP UP
INPUT INPUT SELECTOR SELECTOR
AUTO AUTO
SETUP MIC SETUP MIC
HDMI HDMI
M-DAX M-DAX
PURE DIRECT PURE DIRECT
POWER ON/OFF POWER ON/OFF
STANDBY STANDBY
AV PRE TUNER AV8003 AV PRE TUNER AV8003
ENTER ENTER
3. 4. 1.
1. Pressing the ZONE SPEAKER button on the
unit one time accesses the ZONE SPEAKER
A settings. Pressing it two times accesses the
ZONE SPEAKER B settings. Then, pressing it
a third time turns the ZONE SPEAKER feature
off.
2. When the ZONE SPEAKER setting mode is
engaged, one of the following screens appears
on the display for 10 seconds.
* Display when ZONE SPEAKER A is selected
Z S A D V D - 1 8 d B
* Display when ZONE SPEAKER B is selected
Z S B D V D - 1 8 d B
3. Select an input source with the INPUT
SELECTOR knob.
4. Turn the VOLUME knob to set the volume of
the ZONE used in the zone system as you
like.
Note:
• The sleep timer, monaural output and other features
can also be set using the MAIN MENU. (See page
36.)
Notes for Zone Speaker
• The Zone Speaker mode can be set for only one of
the ZONEs, A or B.
• The ZONE SPEAKER output can be used when
Surround Back Speaker = “NONE, ZSP A or ZSP
B” in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 30)
• “The Surr. Back Speakers are in use” is displayed
when the ZONE SPEAKER button is pressed when
the Surround Back Speaker is not set to “NONE,
ZSP A or ZSP B” in the SPEAKER SETUP menu.
(See SPEAKER SETUP, page 30)
• The Zonespeaker mode cannot be used at the same
time as the speaker C. When connecting for zone
use, set the SPEAKER C selector switch on the rear
panel to OFF.
• When the unit is put in ZONE SPEAKER mode and
ZSP A or ZSP B has been set as the Surround Back
Speaker (P.30), the ZONE SPEAKER function can
be turned on automatically simply by pressing the
SOURCE button.
AV8003_U_Eng.indb 66 AV8003_U_Eng.indb 66 08.4.28 10:40:35 AM 08.4.28 10:40:35 AM