H3C Technologies H3C S10500 Series Switches - Manual (Page 217)

206
To do... Use the command... Remarks
Create a class and enter class view
traffic classifier tcl-name [ operator
and ]
Specify a foreign CVLAN as a match
criterion
if-match customer-vlan-id vlan-id
Specify a local SVLAN as a match
criterion
if-match service-vlan-id vlan-id
Return to system view quit
Required
Repeat these steps to create
one class for each local SVLAN
and foreign CVLAN pair.
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name
Configure a CVLAN marking action to
replace the foreign CVLAN ID with a
local CVLAN ID
remark customer-vlan-id vlan-id
Return to system view quit
Required
Repeat these steps to configure
one CVLAN marking action for
each local SVLAN and foreign
CVLAN pair.
Create a QoS policy and enter QoS
policy view
qos policy policy-name Required
Associate the class with the behavior
classifier tcl-name behavior
behavior-name
Required
Repeat this step to create other
class-behavior associations.
Configuring a downlink policy for the customer-side port
The downlink policy on the customer-side port replaces local SVLAN and CVLAN pairs with foreign
SVLAN and CVLAN pairs.
NOTE:
•
If the uplink policy only replaces the CVLAN tags, skip the step of SVLAN marking.
• If the uplink policy only replaces the SVLAN tags, skip the step of CVLAN marking.
Follow these steps to configure a downlink policy for the customer-side port:
To do... Use the command... Remarks
Enter system view system-view —
Create a class and enter class view
traffic classifier tcl-name
[ operator and ]
Specify a local CVLAN as a match
criterion
if-match customer-vlan-id vlan-id
Specify a local SVLAN as a match
criterion
if-match service-vlan-id vlan-id
Return to system view quit
Required
Repeat these steps to create
one class for each local
CVLAN and SVLAN pair.
Create a traffic behavior and enter
traffic behavior view
traffic behavior behavior-name
Configure a CVLAN marking action to
replace the local CVLAN ID with a
foreign CVLAN ID
remark customer-vlan-id vlan-id
Required
Repeat these steps to create
one VLAN marking behavior
for each local CVLAN and
SVLAN pair.