H3C Technologies H3C S10500 Series Switches - Manual (Page 228)

217
[PE4-GigabitEthernet1/0/1] port link-type trunk
[PE4-GigabitEthernet1/0/1] port trunk permit vlan 200
# Configure port GigabitEthernet 1/0/2 as a hybrid port, and assign it to VLAN 200 as un untagged
member, so the port forwards VLAN 200 traffic with the VLAN tag removed. Enable basic QinQ, and
apply uplink policy test to the incoming traffic on the port.
[PE4] interface gigabitethernet 1/0/2
[PE4-GigabitEthernet1/0/2] port link-type hybrid
[PE4-GigabitEthernet1/0/2] port hybrid vlan 200 untagged
[PE4-GigabitEthernet1/0/2] qinq enable
[PE4-GigabitEthernet1/0/2] qos apply policy test inbound