H3C Technologies H3C S10500 Series Switches - Manual (Page 86)

75
Task Remarks
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send MSTP
packets
Optional
Enabling the output of port state transition information Optional
Enabling the spanning tree feature Required
Performing mCheck Optional
Configuring protection functions Optional
Complete the following tasks to configure PVST:
Task Remarks
Setting the spanning tree mode
Required
Configure the device to work in PVST mode.
Configuring the root bridge or a secondary
root bridge
Optional
Configuring the device priority Optional
Configuring the network diameter of a
switched network
Optional
Configuring spanning tree timers Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring the port link type Optional
Enabling the output of port state transition
information
Optional
Configuring
the root
bridge
Enabling the spanning tree feature Required
Setting the spanning tree mode
Required
Configure the device to work in PVST mode.
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the port link type Optional
Configuring
the leaf
nodes
Enabling the output of port state transition
information
Optional