Verifying the configuration – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 101
Advertising
91
Figure 85 Configuring an alarm group
Verifying the configuration
After the above configuration, when the alarm event is triggered, you can view the log information about
event 1 on the Web interface.
1.
From the navigation tree, select Device > RMON.
2.
Click the Log tab.
The page displaying log information appears. The information indicates that event 1 has
generated one log, which is triggered because the alarm value (22050) exceeds the rising
threshold (1000). The sampling type is absolute.
Figure 86 Log information for event 1
Advertising