Displaying port operation parameters, Displaying all the operation parameters for a port – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 61
51
Displaying port operation parameters
Displaying a specified operation parameter for all ports
1.
From the navigation tree, select Device > Port Management.
The Summary page appears.
2.
Click the button of a parameter you want to view.
The parameter information for all the ports is displayed in the lower part of the page.
Figure 45 The Summary tab
Displaying all the operation parameters for a port
1.
From the navigation tree, select Device > Port Management.
2.
Click the Detail tab.
3.
On the chassis front panel, select a port whose operation parameters you want to view.
The operation parameter settings of the selected port are displayed on the lower part of the page.
Whether the parameter takes effect is displayed in the square brackets.