H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 242)

232
Figure 209 Configuring the voice VLAN function on ports
4. Enable LLDP on ports GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2.
Skip this step if LLDP is enabled (the default).
5. Set both the LLDP operating mode and the CDP operating mode to TxRx on ports GigabitEthernet
1/0/1 and GigabitEthernet 1/0/2:
a. Select Network > LLDP from the navigation tree.
By default, the Port Setup tab is displayed.