H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 247)

237
Managing services
1. Select Network > Service from the navigation tree to enter the service management configuration
page, as shown in
Figure 213 .
Figure 213 Service management
2. Enable or disable various services on the page. Table 83 describes the detailed configuration
items.
3. Click Apply.
Table 83 Configuration items
Item Description
FTP
Enable FTP service.
Enable or disable the FTP service.
The FTP service is disabled by default.
ACL.
Associate the FTP service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the FTP service.
You can view this configuration item by clicking the expanding button
in front of FTP.
Telnet Enable Telnet service.
Enable or disable the Telnet service.
The Telnet service is disabled by default.
SSH Enable SSH service.
Enable or disable the SSH service.
The SSH service is disabled by default.
SFTP Enable SFTP service.
Enable or disable the SFTP service.
The SFTP service is disabled by default.
IMPORTANT:
When you enable the SFTP service, the SSH service must be enabled.
HTTP Enable HTTP service.
Enable or disable the HTTP service.
The HTTP service is enabled by default.