Resetting the configuration – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 54
Advertising
44
Figure 41 Saving the configuration
To save the configuration in common mode:
1.
From the navigation tree, select Device > Configuration.
2.
Click the Save tab.
3.
Click Save Current Settings.
Resetting the configuration
This operation will restore the device's factory defaults, deletes the current configuration file, and reboots
the device.
To reset the configuration:
1.
From the navigation tree, select Device > Configuration.
2.
Click the Initialize tab.
3.
Click Restore Factory-Default Settings to restore the factory defaults.
Figure 42 Resetting the configuration
Advertising