Configuring the agent – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 121
Advertising
111
Figure 110 Network diagram
Configuring the agent
1.
Enable SNMP agent:
a.
From the navigation tree, select Device > SNMP.
The SNMP configuration page appears.
Figure 111 Configuring the SNMP agent
b.
Select the Enable option, and select the v3 option.
c.
Click Apply.
2.
Configure an SNMP view:
a.
Click the View tab.
b.
Click Add.
The page for creating an SNMP view appears.
Figure 112 Creating an SNMP view (1)
c.
Type view1 in the View Name field.
d.
Click Apply.
The page in
appears.
e.
Select the Included option, enter the MIB subtree OID interfaces, and click Add.
Advertising