Port management configuration example, Network requirements – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 62
Advertising
52
Figure 46 The Detail tab
Port management configuration example
Network requirements
As shown in
•
Server A, Server B, and Server C are connected to GigabitEthernet 1/0/1, GigabitEthernet 1/0/2,
and GigabitEthernet 1/0/3 of the switch, respectively. The rates of the network adapters of these
servers are all 1000 Mbps.
•
The switch connects to the external network through GigabitEthernet 1/0/4 whose rate is 1000
Mbps.
To avoid congestion at the egress port, GigabitEthernet 1/0/4, configure the rate of GigabitEthernet
1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 as 100 Mbps.
Advertising