Configuring the switch – H3C Technologies H3C WX5500E Series Access Controllers User Manual
Page 63
Advertising
53
Figure 47 Network diagram
Configuring the switch
1.
Set the rate of GigabitEthernet 1/0/4 to 1000 Mbps:
a.
From the navigation tree, select Device > Port Management.
b.
Click the Setup tab.
c.
From the Speed list, select 1000.
d.
On the chassis front panel, select 4.
4 represents port GigabitEthernet 1/0/4.
e.
Click Apply.
Advertising