H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 47)

37
a. Select Device > System Time from the navigation tree.
b. Click the Network Time Protocol tab.
c. Enter 24 in the ID field, enter aNiceKey in the Key String field for key 1, enter 1.0.1.11 in the
NTP Server 1 field, and enter 24 in the Reference Key ID field.
d. Click Apply.
Figure 35 Configuring Device A as the NTP server of Switch B
Verifying the configuration
After the above configuration, you will see that the current system date and time on Device A is the same
as those on Switch B.