H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 114)

104
Item Description
Security Level
Select the security level for the SNMP group. The available security levels
are:
• NoAuth/NoPriv—No authentication no privacy.
• Auth/NoPriv—Authentication without privacy.
• Auth/Priv—Authentication and privacy.
Group Name
Select an SNMP group to which the user belongs:
• When the security level is NoAuth/NoPriv, you can select an SNMP
group with no authentication no privacy.
• When the security level is Auth/NoPriv, you can select an SNMP
group with no authentication no privacy or authentication without
privacy.
• When the security level is Auth/Priv, you can select an SNMP group of
any security level.
Authentication Mode
Select an authentication mode (including MD5 and SHA) when the
security level is Auth/NoPriv or Auth/Priv.
Authentication Password Set the authentication password when the security level is Auth/NoPriv or
Auth/Priv.
The confirm authentication password must be the same with the
authentication password.
Confirm Authentication Password
Privacy Mode
Select a privacy mode (including DES56, AES128, and 3DES) when the
security level is Auth/Priv.
Privacy Password Set the privacy password when the security level is Auth/Priv.
The confirm privacy password must be the same with the privacy
password.
Confirm Privacy Password
ACL
Associate a basic ACL with the user to restrict the source IP address of
SNMP packets, that is, you can configure to allow or prohibit SNMP
packets with a specific source IP address, so as to allow or prohibit the
specified NMS to access the agent by using this user name.
Configuring SNMP trap function
1. From the navigation tree, select Device > SNMP.
2. Click the Trap tab.
The Trap tab appears.