H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 229)

219
Field Description
Port ID Port ID value.
System capabilities supported
Primary network function of the system:
• Repeater.
• Bridge.
• Router.
System capabilities enabled
Network function enabled on the system:
• Repeater.
• Bridge.
• Router.
Auto-negotiation supported Support of the neighbor for auto negotiation.
Auto-negotiation enabled Enabling status of auto negotiation on the neighbor.
OperMau Current speed and duplex mode of the neighbor.
Link aggregation supported Support of the neighbor for link aggregation.
Link aggregation enabled Enabling status of link aggregation on the neighbor.
Aggregation port ID
Link aggregation group ID. It is 0 if the neighbor port is not assigned to
any link aggregation group.
Maximum frame Size Maximum frame size supported on the neighbor port.
Device class
MED device type:
• Connectivity device—An intermediate device that provide network
connectivity.
• Class I—A generic endpoint device. All endpoints that require the
discovery service of LLDP belong to this category.
• Class II—A media endpoint device. The class II endpoint devices
support the media stream capabilities and the capabilities of generic
endpoint devices.
• Class III—A communication endpoint device. The class III endpoint
devices directly support end users of the IP communication system.
Providing all capabilities of generic and media endpoint devices,
Class III endpoint devices are used directly by end users.
Media policy type
Media policy type:
• Unknown.
• Voice.
• Voice signaling.
• Guest voice.
• Guest voice signaling.
• Soft phone voice.
• Videoconferencing.
• Streaming video.
• Video signaling.
Unknown Policy Indicates whether the media policy type is unknown.
VLAN tagged Indicates whether packets of the media VLAN are tagged.
Media policy VlanID ID of the media VLAN.