H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 205)

195
Creating a link aggregation group
1. Select Network > Link Aggregation from the navigation tree.
2. Click Create.
Figure 178 Creating a link aggregation group
3. Configure a link aggregation group as described in Table 67 .
4. Click Apply.
Table 67 Configuration items
Item Description
Enter Link Aggregation
Interface ID Assign an ID to the link aggregation group to be created.
You can view the result in the Summary area at the bottom of the page.
Specify Interface Type
Set the type of the link aggregation interface to be created:
• Static (LACP Disabled)
• Dynamic (LACP Enabled)
Select port(s) for the link
aggregation interface
Select one or multiple ports to be assigned to the link aggregation group from
the chassis front panel.
You can view the result in the Summary area at the bottom of the page.