Xms settings, Xms settings -8 – Grass Valley Xplorer Vertigo Suite v.4.8 User Manual
Page 84
6-8
Xplorer User Manual
Appendix A - Quick reference to Xplorer’s commands and settings
XMS settings
The XMS settings specify the locations of the main Xmedia Server, as well as the backup
XMS (if applicable), which contains all of the assets, i.e. all building blocks used in the
creation of broadcast graphics. The Xmedia Server is also where playlists, templates,
images, etc., are stored.
The following settings are displayed on the XMS settings tab (figure
6-1
):
•
Servers > XMedia Server IP Address - Specifies the IP address of the machine
running the XmediaServer.
•
Servers > XMedia Server Port - Specifies the port on which the Xmedia Server is
listening.
•
Backup Servers > XMedia Server IP Address - Specifies the backup server’s IP
address used in case of failure of the primary Xmedia Server.
•
Backup Servers > XMedia Server Port - Specifies the backup server’s port used in
case of failure of the primary Xmedia Server.
Figure 6-1. Xplorer’s Xmedia Server settings