LinPlug RMV - Manual (Page 108)

Send Effects
Send Effects
The RMV's Send Effects section is accessed by using the Snd (Send) FX button located in
the Mixer section on the upper left of the instrument's front panel. The Send Effects section
contains seven independent Sets of Effects Racks. One Set of Effects Racks is for use
with the RMV's forty-eight Pads. The remaining six Sets of Effects Racks are for use with
each of the instrument's six Loop Modules.
Three separate Effects Racks are available in each Effects Set. Each Effects Rack
contains three Effects Slots and an EQ. Each Effects Slot can be set to one of nine
different Effects Units. For each Effects Set, the three Effects Racks are in parallel. The
output of the three Effects Racks in each Set is mixed together before leaving the Send
Effects section.
Each of the nine Effects Slots in the RMV's three Effects Racks can be set to one of nine
Effects Units. These are: Delay, Ping Pong, Flanger, Filter, Reverb, Gator, Wah Wah,
Compressor and Crusher. To set the Effects Unit for a particular Effects Slot, click on the
Effect Name located above the Effects Slot. This opens a popup menu displaying the
available Effects Units. Select one of the Effects Units in the popup menu to place it in the
Effects Slot.
LinPlug Reference Manual 5.0.1 108