LinPlug RMV - Manual (Page 24)

Pads
for editing, click and drag on the Pad control until the desired Pad
number is shown.
Module: An Audio module is assigned to a Pad use the Module control
located directly above the Audio module section. Thirteen different
Audio modules are available. The Audio modules are described in
the Audio module section of this manual. To set the Audio module for
a particular Pad, first, select the desired Pad, and then select one of
the RMV's Audio modules using the Module control. The Audio
module is now assigned to the Pad.
Choke: The setting of the Choke control determines which of the RMV's
various choke modes is used. The available choke modes are:
"-" No Choke is applied to this Pad.
"me" Whenever this Pad is triggered, it chokes itself.
"prev" Whenever this Pad is triggered, the previous Pad is choked.
"nxt" Whenever this Pad is triggered, the next Pad is choked.
"1"..."9" The RMV has 9 user-definable choke groups. Whenever an
Instrument in a particular choke group is triggered all other
instruments in that choke group are muted. This is typically used to
simulate the way that real drums generate sound. For example, an
open hihat is "choked" or muted when the drummer closes it with the
footpedal. As such, open and closed hihats often form a choke group.
Voices: The Voices setting determines the maximum number of voices that a
Pad can play at a single time. This ranges from mono...2...8...full
("full" is equivalent to 64 voices). This control is especially useful for
instruments that sound for a long time such as cymbals.
LinPlug Reference Manual 5.0.1 24