LinPlug RMV - Manual (Page 143)

Appendix A: Modulation Sources and Destinations
pitch value (see above) to the second pitch value (see below)
(applies only to the Sampler module).
Pitch Level 2 [S] The pitch envelope's target value (applies only to the Sampler
module).
Pitch Time 2 [S] The length of time taken for the pitch envelope to move from the
second pitch value (see above) to the samples base pitch value
(applies only to the Sampler module).
Amp. Attack [S] The length of time taken for the amplitude envelope to reach the full
envelope depth (applies only to the Sampler module).
Amp. Hold [S] The length of time the amplitude envelope is held at the maximum
envelope depth (applies only to the Sampler module).
Amp. Decay [S] The length of time that the amplitude envelope takes to move from
the Attack level to the Sustain level after the Hold time has elapsed
(applies only to the Sampler module).
Amp. Sustain [S] The level that the amplitude envelope is held at during the Sustain
portion of the envelope (applies only to the Sampler module).
Amp. Release [S] The length of time that the amplitude envelope takes to move from
the Sustain level to 0 after a Note-Off message has been received
(applies only to the Sampler module).
Filter Attack The length of time it takes for the filter cutoff frequency to move from
its initial value to the full envelope depth.
Filter Hold The length of time the filter cutoff frequency is held at the maximum
envelope depth.
Filter Decay The length of time that the filter cutoff frequency takes to move from
the full envelope depth to the Sustain frequency after the Hold time
has elapsed.
Filter Sustain The frequency that the filter cutoff is held at during the Sustain
portion of the envelope.
Filter Release The length of time that the filter cutoff frequency takes to move from
the Sustain frequency to 0 envelope depth after a Note-Off message
has been received.
LinPlug Reference Manual 5.0.1 143