LinPlug RMV - Manual (Page 42)

Audio Modules
Tom
The Tom module employs a pitched oscillator and a noise oscillator to create the
characteristic sound of a tom.
The Tom Percussion Synthesis module contains the following controls:
Pitch Env(elope) Depth: The Pitch Env(elope) Depth control determines the extent to
which the drum's pitch is controlled by the pitch envelope.
Pitch Env(elope) Shape: The Pitch Env(elope) Shape control is used to set the shape of
the drum's pitch envelope. This can range from linear to extreme
exponential.
Osc(illator) Shape: The Osc(illator) Shape control is used to set the shape of the
oscillator waveform. When turned fully anti-clockwise the oscillator
produces a sine wave, while when turned fully clockwise the
oscillator produces a pulse wave.
Osc(illator) Freq(uency): The setting of the Osc(illator) Freq(uency) control determines
the drum's fundamental frequency. The frequency changes from low
to high as the dial is turned in a clockwise direction. This control
interacts with the Tune control on the associated Pad.
Osc(illator) Attack (Time): The Osc(illator) Attack (Time) control is used to set the drum
oscillator's attack time. Setting this control to a high value delays the
onset of the drum waveform, creating damping or muffling effects.
LinPlug Reference Manual 5.0.1 42