LinPlug RMV - Manual (Page 19)

Pads
Pads
The contains 48 Pads. Forty-eight of these Pads are used for triggering the
instrument's Audio Modules. These are arranged into three sets of 16 Pads and are
accessible using the tab controls at the top of the instrument. The remaining six Pads are
used to trigger audio loops and are located in the instrument's six Loop Modules.
Each of the Pads located in instrument's Pad section can be used to trigger a particular
Audio Module (any one of the drum synthesis modules or the Sampler module) that can be
selected by the user. Each Loop Module contains its own dedicated Pad that can only be
used with that particular module.
The RMV's Pads are numbered in horizontal rows from the top
of the instrument to the bottom. Only one Pad is active at a
time. The currently active Pad is shown by an illuminated “E”
indicator located in the top left corner of the Pad. The
instrument displays the Audio Module for the currently active
Pad, as well as the settings of its signal processing path. To
change to a different Pad click on either the “E” button or any
control in the desired Pad. A new Pad can also be selected
using the Pad control located above the Audio module section.
This control also displays the currently active Pad.
LinPlug Reference Manual 5.0.1 19