LinPlug RMV User Manual
Page 37
Audio Modules
Osc(illator) Freq(uency):
The setting of the Osc(illator) Frequency control determines
the drum's fundamental frequency. The frequency changes from low
to high as the dial is turned in a clockwise direction. Note that this
control interacts with the Tune control on the associated Drum Pad.
Osc(illator) Delay (Time):
The Osc(illator) Delay (Time) control is used to set the delay
time between the triggering of the oscillator and the time it starts
playing. The delay time increases as the dial is turned in a clockwise
direction.
Osc(illator) Decay (Time): The Osc(illator) Decay (Time) control is used to determine the
time taken for the sound to decay after it is triggered. The decay time
changes from short to long as the dial is turned in a clockwise
direction.
Noise Volume:
The Noise Volume control is used to adjust the amount of noise
added to the drum sound. As the dial is turned in a clockwise
direction more noise is added to the sound.
LinPlug
Reference Manual 5.0.1
37