LinPlug RMV - Manual (Page 138)

Registration
Registration
After you've installed and opened the full version of RMV, go to the instrument's Setup
Panel (see the Setup Panel section of this manual for more information about the
instrument's Setup Panel). The Serial Number edit box will read "Enter here". Enter the
serial number you have received into the Serial Number edit box. If the serial number has
not been entered or it has been entered incorrectly, the RMV will run in demo mode.
After entering the serial number correctly, the Serial Number edit box displays the word
“Valid” indicating that the instrument is registered. Once registered, the serial number is no
longer displayed on the instrument. Make sure to keep your serial number in a safe place
as you might need it again to register RMV, in example when you bought a new computer.
If you have any questions regarding RMV's registration process, please visit our support
area at
www.linplug.com/support/support.htm .
LinPlug Reference Manual 5.0.1 138